Skip to content
PowerHouse Energy

Contract renewal management

Commercial electricity contract renewal in Texas

The most expensive mistake in business energy is the one nobody notices: a contract quietly expires and the account rolls onto a month-to-month rate. We make sure that never happens to you.

When a Texas business electricity contract expires, the account rolls onto a month-to-month or holdover rate that is not competitively bid and can change each billing cycle. To avoid it, plan your renewal 12 to 24 months before the end date. PowerHouse Energy tracks every end date and starts that planning for you.

What happens when a business electricity contract expires in Texas?

Your power doesn't shut off. Your provider keeps serving the account. What ends is the rate you agreed to. From that day, you pay whatever the provider charges for service outside a contract, and that price was never bid against anyone.

What happens next depends on the size of the account:

  • Small commercial customers are businesses with a peak demand under 50 kW in any 12-month period, as defined in PUCT Substantive Rule 25.471. Under PUCT Substantive Rule 25.475, if you take no action after the final expiration notice, the provider must move you to a default month-to-month product. You can cancel it at any time without penalty, but its price can change from one billing cycle to the next.
  • Larger commercial accounts are governed mainly by the terms of their own contract. When the term ends, the account typically moves to a holdover or month-to-month rate set by the provider. Your contract spells out how that rate is set and what notice, if any, you will get.

Either way, the rate after expiration is set by the provider alone. It can be higher than the rate you would get by shopping the market, and you are exposed to price changes every month until you sign again. The Public Utility Commission of Texas publishes the full customer protection rules if you want to read them.

Will your provider warn you in time?

For small commercial customers on a fixed-rate contract, PUCT rules require the provider to send at least three written notices of the expiration date, spread across the last third of the contract. For contracts of 12 months or longer, the first notice can come as little as three months before the end date, and the final one at least 14 days before it.

That protects you from being surprised. It doesn't give you time to plan. Three months is a short window in a market that moves daily, and the notices may go to a billing address or inbox that nobody watches closely. Larger accounts may get even less, depending on the contract. Relying on the expiration notice means buying on the provider's timeline, not yours.

When should you renew a commercial electricity contract?

Start 12 to 24 months before your current contract ends. Contracts are commonly signed in that window, with a start date that lines up with the day the old one expires. You don't pay twice, and you don't pay to break the old contract.

Starting early matters for three reasons:

  1. You can wait for a window of opportunity. Forward prices move every day with natural gas prices, weather and expected summer demand on the ERCOT grid. With a long runway, you can buy when the market is favorable instead of on whatever day the deadline falls.
  2. You avoid the holdover rate. A new contract is signed and waiting before the old one ends.
  3. You get a real comparison. There is time to bid every provider, explain the offers and make a decision without pressure.

What happens at each point before your contract ends?

What happens at each point before a commercial electricity contract ends
Time before end dateWhat it means for youWhat we do
24 to 12 months beforeThe best planning window. Contracts are commonly signed here.We review your usage, watch forward prices and agree on your strategy and budget.
12 to 6 months beforeStill plenty of choice, and time to wait for a better market.We bid the market when a window of opportunity opens and line up the new start date.
6 to 3 months beforeChoices start to narrow. A rough market week is harder to wait out.If you haven't bought yet, we bid now and explain the best offer.
Last 3 monthsYour provider's expiration notices may start arriving. Little room to wait.We bid quickly, but you take whatever the market offers that week.
End date passesYour contract rate ends. You move to a month-to-month or holdover rate.We bid immediately to get you back onto a contract.

How we track your renewal

Renewal planning is part of what we do every day, not a reminder that pops up near the end. We set market alerts and review upcoming renewals every month. For every client, we:

  • record the end date of every meter and contract we manage for you;
  • watch the market for your account during the whole contract;
  • start renewal planning with you 12 to 24 months before each end date;
  • bid your renewal across 25+ retail providers, including your current one, when a window of opportunity opens;
  • explain the best offer in clear, everyday language and line up the new start date.

When you call about a renewal, a real person answers live. If you request a callback, we call back within 10 minutes during business hours.

Renewals for multi-location businesses

Franchises, convenience store owners, hotel groups and property managers often have meters on different contracts with end dates scattered across the calendar. That is how locations slip onto month-to-month rates without anyone noticing. We map every location, utility and end date into one schedule. Then we decide with you whether to bring meters onto a shared end date or keep them staggered, which spreads your exposure to any single week in the market. Our energy risk management page explains the tradeoff.

What to check before you renew

  • Your exact end date, for every meter. It is on your contract and sometimes on your bill.
  • What your contract says happens at expiration, including how a holdover rate is set and whether any automatic renewal clause applies.
  • Your usage over the last year, including your peak demand, so offers are priced on your real load.
  • Any changes coming (new locations, closures, expansions) that the new contract should allow for.
  • Who you are working with. Texas brokers must register with the PUCT. Ours is BR250085. See PUCT broker registration and 20 questions to ask any energy broker.

Not sure when your contract ends? Send a recent bill. We will help you find the end date and tell you how much runway you have. For the buying decision itself, see energy strategy consulting and commercial electricity procurement.

How it works

Four simple steps

  1. 1

    Tell us the basics

    Your monthly bill amount, zip code and contract end date. Sending a bill is optional.

  2. 2

    We bid 25+ providers

    Custom pricing for your account, with several locations grouped if that helps.

  3. 3

    You see the best offer

    Explained in clear, everyday language. You decide.

  4. 4

    We stay with you

    We check in from time to time, without pestering you, and plan your renewal well ahead.

Common questions

What happens when a business electricity contract expires in Texas?

If you don't sign a new contract, your provider keeps serving you, but no longer at your contract rate. Small commercial customers (peak demand under 50 kW) move to a month-to-month product under PUCT rules. Larger accounts usually move to a holdover or month-to-month rate set by the provider under the contract's own terms. Either way, the rate is not competitively bid and can change.

When should I renew my commercial electricity contract?

Start planning 12 to 24 months before your current contract ends. Contracts are commonly signed in that window. Starting early does not force you to buy early. It gives you time to buy during a window of opportunity instead of on a deadline.

Can I sign a new contract while my current one is still running?

Yes. You can sign a new contract months or even a year or more ahead, with a start date that lines up with the day your current contract ends. That way you never pay a holdover rate and you never pay to break the old contract early.

Will my provider warn me before my contract ends?

For small commercial customers, PUCT rules require at least three written expiration notices in the last third of the contract, with the first allowed up to three months before the end date. Larger accounts depend on their contract terms. Either way, the notices arrive far later than the 12 to 24 month planning window, and they may land with whoever opens the mail.

Should I just accept my current provider's renewal offer?

It might be a good offer, but it is one offer. Without bids from other providers you have nothing to compare it to. We take your renewal to 25+ retail providers, including your current one, and tell you plainly which offer comes out on top.

How does PowerHouse Energy keep track of my renewal?

We record the end date of every meter and contract you have with us, watches the market for your account during the contract, and starts renewal planning with you 12 to 24 months before each end date.

Know your end date? Let's plan the renewal.

Send a recent bill and your contract end date. A real person reviews it, and callbacks happen within 10 minutes during business hours.